Description

MADRIX USB One DMX USB Lighting Controller

The USB ONE allows you to control 512 DMX channels via Madrix software.

  • DMX-IN/OUT with 5-pin NEUTRIK XLR Port: This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.
  • USB 2.0 Standard: The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s.
  • Power Over USB: The interface is powered directly via the USB port and does not need an additional power supply.
  • Hot Swapping & Plug and Play: Devices can be connected to and disconnected from the computer during use and without a reboot.
  • Remote Control: MADRIX can be controlled remotely using the built-in DMX-IN functions.
  • Frame Rate Stability: Up to 60 devices can be connected to a single USB host controller without having any frame rate problems (60 DMX512 interfaces amount to 30,720 DMX channels).
  • Active USB: Must be connected to an active USB 2.0 hub with a power supply.

Technical Specifications
Supply of Power DC 5 V, 500 mA, Power over USB
Power Consumption ~ 55 mA during normal operation
BTU/h 1.00 during normal operation
DMX512 512 DMX channels, input or output
Plug 5-pin, XLR, female, NEUTRIK
USB 1x port, USB 2.0, type-A male plug, Plug and Play, 2 m cable
Weight 105 g (0.23 lb)
Temperature Range 10 °C to 50 °C (50 °F to 122 °F) (Operating) | -10 °C to 70 °C (14 °F to 158 °F) (Storage)
Relative Humidity 5 % to 80 %, non-condensing (Operating / Storage)
IP Rating IP20

SKU# USB One