OPTOTRONIC OTi 30W 120-277 1A0 DIM-1 L AUX G2 0-10V CC Programmable Linear LED Driver (*2743X5 / 57454)

Description

OPTOTRONIC OTi 30W 120-277 1A0 DIM-1 L AUX G2 0-10V CC Programmable Linear LED Driver (*2743X5 / 57454)

eldoLED *2743X5 OPTOTRONIC 30W Constant Current 0-10V Dimmable LED Driver, Programmable Linear OTi 30/120-277/1A0 DIM-1 L AUX G2 (Osram 57454)

The eldoLED *2743X5 OPTOTRONIC 30W programmable dimmable family consists of highly efficient, linear, constant current LED drivers. One-click programming through the OPTOTRONIC programmer allows OEMs to configure the output current with a 1mA resolution. Also fully customizable by customers are the end-of-life indicator, LED thermal protection, and constant lumen maintenance features. The OPTOTRONIC programmer does not require the driver to be powered up or connected to AC line voltage while programming. The power supplies are available with a built-in 0-10V dimming protocol with models available in authentic 1% to 10%. The auxiliary output has the capability to power various sensors.

Main Features

• Type: Constant Current, Class2
• Output Power: 30W (Max.)
• Input Voltage: 120-277V AC
• Output Voltage: 10-55V DC
• Output current: 150-1050mA (1mA steps) / Default 700mA
• Frequency Range: 50–60Hz (+/- 10%)
• Dimming Control: 0–10V (Isolated)
• Dimming Range: 1-100%
• Dimming Type: Analog
• Maximum Case Temperature (Tc point):  70°C for 35W
• Ambient Operating Temperature:  -30°C to 50°C (-4°F to 122°F)
• Maximum Storage Temperature:  70°C
• Dimensions (L x W x H): 11.00” (280mm) x 1.15” (29.4mm) x 1.0” (25.4mm)
• Wight: 8.7oz
• Programming Tool
  • *274A17 (51645)
  • *2747CR/*2743V1 (51647/ 51648)
• Auxiliary Output
  • Output Voltage: 12/20/24V (Configurable)
  • Max Output Power: 1W
  • Voltage Regulation: ±10%
• Warranty: 5 Years

Key Application Notes

• Dim-to-off and Soft Start are programmable (enable/disable) features. The default mode for both features is disabled for out-of-the-box products. If these features are required, they must be enabled in the programming software.
• If the LED Thermal Protection feature is used, an NTC thermistor must be connected to the driver.

Application Information

• Indirect/direct
• Linear
• Recessed troffer

Downloadable Documentation:

• Datasheet
• Spec Sheet
• Technical Guide

SKU# *2743X5 (57454)