Pharos XPC Expert ControlseDMX/DMX, Dali, IO, Stand Alone Ethernet Controller

Description

Benefit from Pharos’ expertise in dynamic architectural lighting with an all-new, practical, straightforward control solution centered around a single, reliable Set-and forgets controller.

With DMX, DALI, and a couple of convenient contact closures and relays all on board, Expert Control 1 provides up to 512 channels and is just the job for architectural lighting that requires the benefits of dynamic movement and color in a cost-effective and user-friendly package.

Expert Software helps and guides you through programming the controller. Also available are a companion 5” touchscreen; the elegant Expert Touch, and completing the range is two accessories: Expert Repeat, which is a convenient DMX splitter for output distribution and Expert Switch for PoE networking.

With the reliability you expect from Pharos and our expertise in dynamic lighting in architecture and entertainment: an easy-to-install, easy-to-use control solution.

Main Features

Supported Fixtures: 

• LEDs:  LEDs in any color configuration (RGB, RGBW, RGBA, 8-bit, 16-bit, tunable white)
• Generic:  Downlights, spotlights, Uplights, etc. via controllable dimmers and relays
• DALI:  Ballasts are supported, such as single channel, RGBWAF, Tc, and XY

Output:

• Output:  512 DMX Channels
• RDM:  Supports discovery and addressing via Designer Software
• sACN:  USITT E1.31 (with per fixture priority) standard
• Art-Net: ArtNet, ArtNet II, and ArtNet III (configurable broadcast overrides)
• KiNET:  KiNET V1 (DMX out) and V2 (Port out); PDS/Data Enabler
  discovery
• DALI:  Support for a single channel, Tc, XY and RGBWAF
• Simultaneous:  Multiple protocols can be in operation simultaneously. Limited by
  patched channels, not universes used

Interfaces:

• Rotary Dial:  A rotating dial for switching to customizable preprogrammed
  states or test setups
• Ethernet:  RJ45 socket for 10/100Base-TX Ethernet Link/Data LEDs;
  Static IP or DHCP; Dual IP address for eDMX
• DMX512:  Two isolated DMX ports, RDM compatible
• Inputs:  Two inputs, individually selectable operating mode for contact closure, digital or analog input
• Relay Outs:  Two individually isolated (1KV) relay outputs (48V 250mA)

Specifications:

• Power:  9V to 48V DC * or PoE (IEEE802.3af, Class 2) 4W typical
• Data Storage:  Removable MicroSD card (provided)
• Temperature:  0°C to 50°C (32°F to 122°F)
• IP Rating:  IP40
• Warranty:  5 years
• Certifications:  CE compliant, ETL/cETL listed, UKCA compliant

Documents:

• Datasheet