Description

SIRS-E anyDMX V2 Wireless DMX Transmitter & Receiver (Transceivers) Male and Female 5 Pin XLR Pair

A minimum of two wireless DMX units is required to operate a system. One Transmitter TX (Male) is needed to send the DMX signal, and an unlimited amount of receivers RX (Female) can be paired to the transmitter.

Features:

  • Reliable wireless DMX 512 signal.
  • Digital screen
  • Up to 2,000 meters range. (Line of sight)
  • A total of 16 frequencies to choose from.
  • One unit can both transmit and receive (Transceiver*).
  • An unlimited amount of units can work together.
  • Sturdy aluminum construction.

Product Specs
Model anyDMX-V2 X2
Operating Voltage 5V DC
Current 500mA
Ambient Temperature -20°C~50°C
Range 2,000 m (Inline of sight)
IP Rating IP40 (Non-Waterproof, keep dry at all times)
Working Frequency 2.4GHz to 2.525GHz
Dimensions 209mm x 20mm x 20mm (8.22in. x .78in. x .78in.)

Quick Set-Up Guide

  • 1. Connect the power supply to the unit.
  • 2. Select the same color frequency, and mode LED light using the frequency changing key on both units. (This is your operating frequency)
  • 3. Connect the transmitting unit to the DMX console or software.
  • 4. The frequency and mode LED will begin to flash red on the unit connected as a transmitter.
  • 5. At this time, the frequency and mode LED on the receiving unit will flash blue. (This means it’s receiving)
  • 6. Connect receiving unit to DMX fixture.
  • 7. A successful connection has now been achieved.
  • *This wireless DMX unit is a transceiver and can Transmit or Receive DMX. A Gender Changer is required and sold separately.

Box Content

  • 1) anyDMX-V2 Wireless DMX Receiver
  • 1) anyDMX-V2 Wireless DMX Transmitter
  • 2) 5V DC Power Supplies

Downloadable Documentation:
Receiver Datasheet
Transmitter Datasheet

SKU# anyDMX-V2 X2