Description

ACE LEDS ACE-G10-55-190C 10W Constant Current Emergency LED Driver

The ACE LEDs 10W UL Listed Emergency Backup Driver allows a single fixture to be used for regular and emergency (loss of power) operations. If power fails, this emergency driver switches to “Emergency Mode.” It will then operate the LED modules for 90 minutes at an output voltage of 15-55V. It can be used in conjunction with switched and unswitched fixture applications. During Emergency operations, this driver will drive any LED module that is designed to accept a constant current input of 171mA up to 190mA and has an input voltage in the range of 15-55V.

Product Features

  • At least 90-minute operation in emergency mode
  • Wide range input voltage – range – 120-277VAC
  • Operating Temperature Range 0˚C Through 55˚C
  • Test switch and AC Power-On LED indicator for self-diagnostic test
  • Up to 87% Efficiency
  • Surge Protection – 3kV
  • Open/Short/Over-Voltage/Over Temperature protection

Technical Specifications

  • Constant Current Emergency LED Driver
  • Input Voltage: 120-277VAC
  • Input Frequency: 50/60Hz
  • Input Current (max): 60mA
  • Input Power: 4W
  • Output Voltage: 15-55VDC
  • Output Current: 190mA
  • Output Power: 10W (max)
  • Battery Voltage =: 6.4V
  • Battery Charge Current: 185mA
  • Battery Charge Time (max): 24Hrs
  • Operating Duration (min): 90min
  • UL and cUL Listed as an LED emergency driver
  • UL/cUL Class 2
  • Product Dimensions: 9.5″L x 1.7″W x 1.14″H x 8.9″M
  • Warranty: 5 years based on a maximum case temperature of ≤ 60 °C, 3 years warranty based on a maximum case temperature of ≤ 66 °C

Applications

  • New and existing fixtures
  • Emergency back-up installations
  • Emergency only fixtures
  • With constant current Class 2 LED driver

Box Content

  • ACE LEDS ACE-G10-55-190C 10W Driver
  • Manual

Downloadable Documentation:
Datasheet
Installation Instructions

SKU# ACE-G10-55-190C